Installation Guide

ABOVE COUNTER RECESSED
INTO COUNTER
More on Front q
THE STEPS
ABOVE COUNTER
INSTALLATION
RECESSED
INSTALLATION
INSTALLATION
INSTRUCTIONS
CONTINUED
877.946.5725
Toledo, Ohio
[e-mail]
www.MRDirectInt.com
Vessel
Sinks
Measure and cut a hole in the
countertop to the diameter
necessary to hold the sink at
the desired depth. The recess
should not exceed half of the
bowl’s height. The hole should
be cut on a bevel to match the
bowl’s angle.
Rest the basin in the hole.
Install the drain.
Measure and cut a hole in the
countertop matching the diame-
ter of the drain pipe.
If the bowl has a curved bottom
it will require a sink ring. Position
the ring on the counter over the
drain hole, then rest the basin on
the ring.
If the bowl has a at bottom it
can be rested directly on the
counter without a sink ring.
Install the drain.