Installation & Assembly

Faucet Installation
E
G
C
F
A
A. Turn off the water supply. Remove the
faucet with the mounting hardware
attatched from the package.
B. Remove all mounting hardware from
the shank.
D
B
C. Insert optional base plate if applicable.
Followed by the base plate gasket.
D. Insert the shank of the faucet body into
the hole of the sink deck.
E. From the underside of the sink or mounting
surface, attach the gasket and washer,
followed by the lock nut, onto the shank.
F. Tighten screws using a phillips head
screwdriver until secure.
G. Attach the opposite end of each hose
to the corresponding water supply lines
by tightening the 3/8" compression ttings
onto the lines. Secure all ttings with a 1/4
turn of a wrench.
2
Installation Guide
shank
washers
lock nut
mounting
screws
baseplate
baseplate
gasket
sink deck
gasket
2