Installation & Assembly

INSTALLATION INSTRUCTIONS (cont...)
Topmount Sinks
THE STEPS
MORE ON FRONT
877.946.5725
Toledo, Ohio
[e-mail]
www.MRDirectInt.com
THE INSTALLATION OF ANY
TOPMOUNT-STYLE SINK
Determine the locations for theclip brackets around
the perimeter of the sink. Pre-drill holes for the
clips using appropriate methods for the countertop
material.
Clean the surfaces of the sink and countertop which
will meet, with denatured alcohol.
Evenly apply a bead of siliconealong perimeter edge
of the opening on the top of the countertop.
Carefully align the sink over the countertop opening.
Evenly apply pressure to the sink securing a seal of
the silicone against the countertop.
Re-check that the sink is evenly aligned with the
countertop.
Attach and tighten the clip brackets against the edge
of the sink. Do not tighten one screw completely
before others. Partially tighten one clip then the one
across from it, and so on until all clips are fully
tightened. This will safeguard against an uneven or
insecure installation.
Use a cloth with denatured alcohol along the
perimeter of the sink and countertop to remove any
excess sealant.