Installation Guide

INSTALLATION

INSTRUCTIONS

SinkLink

877.946.5725

Toledo, Ohio

Sales@MRDirectInt.com

www.MRDirectInt.com

Required Tools

Pencil

Router

Silicone Glue & Gun

Power Drill

Circular saw

Jigsaw

Wood Screws*

Sander

Sandpaper

Denatured Alcohol

Microfiber Cloth

Safety Glasses & Gloves (Recommended)

*Length of screws will depend on thickness of countertop

PAGE 1
INSTALLATION INSTRUCTIONS SinkLink 877.946.5725 Toledo, Ohio Sales@MRDirectInt.com www.MRDirectInt.
PAGE 2
INSTALLATION GUIDE SinkLink Installation Please read and follow these directions carefully: 1. Place the SinkLink, flat side up, on the desired location of your blank particleboard countertop. (See Figure A) A Trace Sink Link Countertop 2. Trace the exterior bottom edge (where the SinkLink and particleboard countertop meet) onto the countertop. This will become the underside of the countertop. 3.
PAGE 3
INSTALLATION GUIDE 10. Attach and tighten the included clip brackets against the edge of the sink with 3/4”wood screws. Do not tighten one screw completely before others. Partially tighten one clip then the one across from it, and so on until all clips are fully tightened. This will safeguard against an uneven or insecure installation. (See Figure E) E *Underside of counter 11. Remove any excess silicone along the sink lip under the countertop. 12.