Owner manual

Single Oil Filter Kit
Description Qty
Oil Filter By-Pass Adapter 1
Remote Oil Filter Mounting Bracket 1
Nitrile O-Ring 1
Nitrile Hose 60” Length 1
Threaded Nipple - 3/4”-16 x 1-1/4” 1
Brass Fitting - Male 2
1/2” NPT x 1/2” I.D. Flare
Brass Fitting - Male 2
1/2” NPT x 1/2” I.D. Barb End
Brass Fitting - Female 2
1/2” I.D. Barb End x 1/2” I.D. Flare
5/16”-18 Hex Head Bolt 3
5/16”-18 Hex Head Bolt 3
5/16”-18 Lock Nut 3
5/16” Flat Washer 3
Dual Oil Filter Kit
Description Qty
Oil Filter By-Pass Adapter 1
Remote Oil Filter Mounting Bracket 1
Nitrile O-Ring 1
Nitrile Hose 60” Length 1
Threaded Nipple - 3/4”-16 x 1-1/4” 2
1/2” NPT Hex Socket Pipe Plug 2
Brass Fitting - Male 2
1/2” NPT x 1/2” I.D. Flare
Brass Fitting - Male 2
1/2” NPT x 1/2” I.D. Barb End
Brass Fitting - Female 2
1/2” I.D. Barb End x 1/2” I.D. Flare
5/16”-18 Hex Head Bolt 3
5/16”-18 Hex Head Bolt 3
5/16”-18 Lock Nut 3
5/16” Flat Washer 3
Contents of Remote Oil Filter System Kits
Note: Retain this instruction sheet for future reference.
Technical Service
A highly trained technical service department is maintained by Mr. Gasket Company to answer your technical questions,
provide additional product information and offer various recommendations. See your local retailer of Mr. Gasket prod-
ucts for specific prices.
For best results, technical service calls, correspondence and warranty questions should be directed to the
following address:
Prestolite Performance
10601 Memphis Ave., #12
Cleveland, OH 44144
Phone: [phone]
8:30 A.M. - 5:00 P.M. EST
MR. GASKET IS A TRADEMARK OF PRESTOLITE PERFORMANCE
10601 MEMPHIS AVE #12, CLEVELAND, OH 44144
216.688.8300 FAX [phone]
FORM 97140111 (Rev B)
01/12
Printed in U.S.A.
www.mr-gasket.com MR. GASKET
4