Controls Installation Sheet

mr
.
steam
®
Installation & Operating Instructions
______________________________________________________________
4
BEFORE INSTALLING
Carefully inspect the control and packaging for ship-
ping damage. In the event of shipping damage, please
contact the carrier for claim information. Our customer
service department can assist you with any missing or
damaged parts.
To avoid unintentional steambath op-
eration, do not locate the control where other controls,
accessories, shower heads, valves, body sprays or simi-
lar within the shower could cause confusion or interfere
with the Mr.Steam
®
control’s intended use and function.
Do not use any iTempoPlus
™
, iTempo
™
, HomeWizard
™
or iGenie
®
controls without reading and understanding
the respective Installation and Operation Manual and
Mr.Steam steam generator Installation and Operation
Manual (PN 101289 Revision number 10.0/08 or higher).
Failure to read and understand these instructions may
result in an inoperative or hazardous installation.
A peel and stick warning sticker is
provided in the MrSteam steam generator Installation,
Operation and Maintenance Manual. This manual is
provided with every steam generator. The warning
sticker must be read and permanently affixed in a
conspicuous location near the steam room. Failure to
read and affix this warning sticker in a conspicuous
location may result in serious injury or death. Please call
MrSteam at 800 767-8326 for a free replacement or if
you have any questions regarding the warning sticker.
Install the iTempo or iTempoPlus controls according to
installation instructions. Failure to install according to
instructions will result in an inoperative control or haz-
ardous overheating or inadequate heating of the steam
room. If an iTempo or iTempoPlus control is installed
outside the steam room a Remote Temperature Probe
(PN MSTS) must be installed inside the steam room
CAUTION
!
per instructions for the Remote Temperature Probe.
Failure to install according to instructions will result in
an inoperative control and overheating of the steam
room.
Do not route iTempoPlus, iTempo,
Home Wizard or iGenie control wiring inside conduit
together with power lines or close to hot water or
steam piping. Doing so may result in an inoperative or
hazardous installation.
Do not alter or modify any Mr. Steam
product. Doing so may result in an inoperative or haz-
ardous installation and will void the warranty.
IMPORTANT NOTES:
• Turn power to the steam generator OFF before con-
necting the control to the generator. Failure to turn
the power off will result in an inoperable control.
• Do not operate iTempoPlus, iTempo, Home Wiz-
ard or iGenie controls with anything other than a
Mr.Steam iTempo compatible steam generator.
Mr.Steam residential steam generators with serial
numbers lower than 900000, or any other brand
of steam generator are not to be operated with
iTempo controls. Doing so may result in an
inoperative installation.
• This document contains important safety,
operation and maintenance information. Leave this
document with the homeowner.
Do not discard this document.
• Discontinue use of the steam generator
or control if the steam generator is damaged or oth-
erwise not functioning properly. Doing so may result
in an inoperative or hazardous installation.
• All illustrations are for illustrative purposes only.
WARNING
!
WARNING
!
WARNING
!