Instructions / Assembly
14
AIRTEMPO SURFACE MOUNT INSTALLATION
Step 1
Determine the desired installation location of the control. The AirTempo controls are designed
to be installed inside or outside the steam room as a matter of personal preference.
If the control is installed outside the steam room a Remote Temperature Probe part number
MSTS must be installed inside the steam room. See Remote Temperature Sensor (page 17).
Step 2
• Remove the surface mount bayonet from the back of the AirTempo Control.
• Remove and discard the release paper to expose the adhesive liner.
• Ensure the mounting surface is clean and dry.
• Place the bayonet on the wall in the desired location
(on veritcal wall 4-5 feet above the oor near the bather seating area)
WIRELESS RECEIVER INSTALLATION
The control can be located up to 60 feet from the wireless receiver. Construction materials may affect the
communication between the control and the receiver. Test the range of the AirTempo. It may be necessary to
change the location of the wireless receiver to improve the range. Contact MrSteam technical service for an
optional 30 or 60 foot cable. Using the 3 foot cable provided, plug one end into the steam bath generator
and the other end into the AirTempo.
Attach the dongle on a
wall adjacent to the steam
generator using the screw
provided.
For Illustrative purposes only. Consult with qualified designer,
architect or contractor for steamroom construction details.
AIRTEMPO CONTROL SURFACE MOUNT
IMPORTANT The information in this guideline is designed to provide a general overview of how MrSteam products are installed. The diagrams are for Illustrative purposes only. NEVER use this document for the Installation,
Operation or Maintenance of any MrSteam product. For Installation, Operation and Maintenance information, only use the specic Installation, Operation and Maintenance manual supplied with each Mr. Steam product. The
specic Installation, Operation and Maintenance manual that is supplied with each Mr. Steam product contains important information required for the safe and reliable installation and operation of the product. Failure to use
the specic Installation, Operation and Maintenance manual that is supplied with each Mr. Steam product may result in product damage, property damage, death or personal injury. If you do not have an Installation, Operation
and Maintenance manual please contact MrSteam for a free copy, or download a copy from www.mrsteam.com. If you have any questions about the installation, operation or maintenance of any MrSteam product please
contact a customer or technical service representative using the contact information on the back cover of this guideline.