Instructions / Assembly

26
For Illustrative purposes only. Consult with qualified designer, architect or contractor for steamroom construction details.
10 9 8 7 6 5 4 3 2 1
Fig 2. Fig 3. Fig 4.
Route Wires
Auxiliary
Cord
FM Antenna
Communication
Port
Speaker and
Subwoofer
Outputs
Power
Cord
Step 1. Locating and Installing AudioSteam
(Figure 1A)
To prevent water from getting inside the device,
AudioSteam should be mounted on two stable vertical
surfaces (e.g., studs) as shown in (Figure 1B).
Using screws and washers, rmly attach AudioSteam
using the upper mounting holes, one at a time, on
each side of the unit. Repeat the process for the lower
mounting holes (Figure 1B).
Step 2. Using a Phillips-head screwdriver, remove the
two cover screws from the front of the AudioSteam
and remove the cover from the unit.
Connect the outputs of AudioSteam as shown in
(Figure 2).
Step 4. Plug the included FM antenna into the
antenna output and route the wire through the strain
relief channel as illustrated (Figure 3).
For best reception, fully deploy the antenna in a
vertical orientation outside of the AudioSteam
housing.
Connect a 1/8” (3.5 mm) stereo audio cord
(not included) to the auxiliary output, and route the
cable through the strain relief channel as illustrated
(Figure 3). Connect the free end of the
audio cord to a mobile device or digital music
player.
Step 5. Connect individual speaker wires — or
a 10-pin MATE-N-LOK adapter with attached wires
— to the speaker outputs. (Figure 4).
AUDIOSTEAM3 INSTALLATION
Fig (1a).
Speakers
Fig (1b).
AudioSteam
Antenna
Grounded
Wall Outlet
Power
Cord (6 ft)
Speaker Wire (100ft max)
iSteam3
Steam Room
(Wet)
(Dry)
In-Room Control Cable (30/60 ft)
AudioSteam Control Cable (30/60 ft)
Steam
Generator
AUDIOSTEAM3 INSTALLATION
IMPORTANT The information in this guideline is designed to provide a general overview of how MrSteam products are installed. The diagrams are for Illustrative purposes only. NEVER use this document for the Installation,
Operation or Maintenance of any MrSteam product. For Installation, Operation and Maintenance information, only use the specic Installation, Operation and Maintenance manual supplied with each Mr. Steam product. The
specic Installation, Operation and Maintenance manual that is supplied with each Mr. Steam product contains important information required for the safe and reliable installation and operation of the product. Failure to use
the specic Installation, Operation and Maintenance manual that is supplied with each Mr. Steam product may result in product damage, property damage, death or personal injury. If you do not have an Installation, Operation
and Maintenance manual please contact MrSteam for a free copy, or download a copy from www.mrsteam.com. If you have any questions about the installation, operation or maintenance of any MrSteam product please
contact a customer or technical service representative using the contact information on the back cover of this guideline.
Note: AudioSteam3 to be used with the iSteam3 only.