Instructions / Assembly
27
SPEAKER INSTALLATION
MS-Speakers
• Two flush-mount two-way speakers for steam/shower use,
polypropylene cones, ABS frames with grills.
• Suitable for almost any source of audio input.
• Rated 60W peak power 8 ohms impedance with 1”
tweeter for full range sound.
• Use only CL2 or CL3 UL listed wires to connect speakers
to audio source.
• Available in Round (5 1/2 inch) and Square (7 inch) in both
white and black designs.
BRACKETS
rotate out for
speaker installation
in wall or ceiling
SILICONE RTV
Apply silicone bead
around entire speaker
Wall or Ceiling
Speaker
Grill
SPEAKER INSTALLATION
IMPORTANT The information in this guideline is designed to provide a general overview of how MrSteam products are installed. The diagrams are for Illustrative purposes only. NEVER use this document for the Installation,
Operation or Maintenance of any MrSteam product. For Installation, Operation and Maintenance information, only use the specic Installation, Operation and Maintenance manual supplied with each Mr. Steam product. The
specic Installation, Operation and Maintenance manual that is supplied with each Mr. Steam product contains important information required for the safe and reliable installation and operation of the product. Failure to use
the specic Installation, Operation and Maintenance manual that is supplied with each Mr. Steam product may result in product damage, property damage, death or personal injury. If you do not have an Installation, Operation
and Maintenance manual please contact MrSteam for a free copy, or download a copy from www.mrsteam.com. If you have any questions about the installation, operation or maintenance of any MrSteam product please
contact a customer or technical service representative using the contact information on the back cover of this guideline.