Instructions / Assembly
WATER FEED
4
1. Connect cold water line.
2. Provide a shut off valve, and a copper or brass union on the water supply line, upstream
of the steambath generator
3. Do not overheat inlet solenoid valve with solder connections. Overheating will damage parts.
4. Flush inlet water line thoroughly before making connection to unit.
5. Strainer recommended upstream of feed water connection.
6. For best performance water pressure should be 15 to 20 PSIG. Reduce pressure as required if necessary.
MrSteam part number 104198.
7. Provide anti-water hammer device as required.
8. As required by local codes, install an approved backflow preventer.
9. Do not use PEX or PVC tubing.
WATER FEED
For Illustrative purposes only. Consult with qualified designer,
architect or contractor for steamroom construction details.
Water Feed Line
(3/8” NPT)
IMPORTANT The information in this guideline is designed to provide a general overview of how MrSteam products are installed. The diagrams are for Illustrative purposes only. NEVER use this document for the Installation,
Operation or Maintenance of any MrSteam product. For Installation, Operation and Maintenance information, only use the specic Installation, Operation and Maintenance manual supplied with each Mr. Steam product. The
specic Installation, Operation and Maintenance manual that is supplied with each Mr. Steam product contains important information required for the safe and reliable installation and operation of the product. Failure to use
the specic Installation, Operation and Maintenance manual that is supplied with each Mr. Steam product may result in product damage, property damage, death or personal injury. If you do not have an Installation, Operation
and Maintenance manual please contact MrSteam for a free copy, or download a copy from www.mrsteam.com. If you have any questions about the installation, operation or maintenance of any MrSteam product please
contact a customer or technical service representative using the contact information on the back cover of this guideline.