Instructions / Assembly

DRAIN LINE
6
MANUAL DRAIN LINE
Drain ( 1/2” NPT)
NOTE: A drain valve is provided to facilitate servicing. Provide a drain line connection from steam
-
bath generator drain valve according to National and local Codes. Check local plumbing code for
receptor, trap and vent requirements.
Unit drains by gravity.
1/2” copper or brass union needed.
Manual Drain Valve
(shown in open position)
Pitch as required for
gravity drain
For Illustrative purposes only. Consult with qualified designer,
architect or contractor for steamroom construction details.
IMPORTANT The information in this guideline is designed to provide a general overview of how MrSteam products are installed. The diagrams are for Illustrative purposes only. NEVER use this document for the Installation,
Operation or Maintenance of any MrSteam product. For Installation, Operation and Maintenance information, only use the specic Installation, Operation and Maintenance manual supplied with each Mr. Steam product. The
specic Installation, Operation and Maintenance manual that is supplied with each Mr. Steam product contains important information required for the safe and reliable installation and operation of the product. Failure to use
the specic Installation, Operation and Maintenance manual that is supplied with each Mr. Steam product may result in product damage, property damage, death or personal injury. If you do not have an Installation, Operation
and Maintenance manual please contact MrSteam for a free copy, or download a copy from www.mrsteam.com. If you have any questions about the installation, operation or maintenance of any MrSteam product please
contact a customer or technical service representative using the contact information on the back cover of this guideline.