Control Unit Installation Sheet

steam

USER/HOMEOWNER INFORMATION

__________________________________________________________________

Care Tips

Use only mild soap and water on a soft cloth to clean

the control. Do not use abrasive cleansers.

Safety and Operating Information

A peel and stick warning sticker is provided

in the MrSteam steam generator Installation, Operation

and Maintenance Manual. This manual is provided with

every steam generator. The warning sticker must be read

and permanently afﬁxed in a conspicuous location near the

steam room. Failure to read and afﬁx this warning sticker in

a conspicuous location may result in serious injury or death.

Please call MrSteam at 800 767-8326 for a free replacement

or if you have any questions regarding the warning sticker.

Set the steam bathing duration and tempera-

ture according to personal preference, however it is highly

recommended to begin steam bathing at a low temperature

setting to gauge comfort and safety levels. Set the duration

at 10 minutes max. to gauge comfort and safety levels. This

will allow the steam generator to heat up and begin produc-

ing steam.

Do not use any iSteam

3 control without

reading and understanding the MrSteam steam generator

Installation and Operation Manual (PN 100472). Failure to

read and understand these instructions may result in an in-

operative or hazardous installation.

If an iSteam3 control is installed outside the

steam room a Remote Temperature Probe (PN MSTS) must

be installed inside the steam room per installation instruc-

tions supplied with the Remote Temperature Probe. Failure

to install according to instructions will result in an inopera-

tive control and overheating of the steam room.

CAUTION

WARNING

Warranty

To view or download the MrSteam Control Warranty

and register your product go to

blog.mrsteam.com/wr