Specification

ManualsBrandsMr. Steam ManualsBathButler Package with iTempo Plus Round Programmable Control for Steam Bath Generator in Polished Chrome

TS0009 6.14

steam

Sussman-Automatic Corp®

hello@mrsteam.com www.mrsteam.com

43-20 34th Street, Long Island City, NY 11101 tel: 1 800 76 STEAM fax: 718 472 3256

9410 S. La Cienega Blvd. Inglewood CA 90301 tel: 1 800 72 STEAM fax: 310 216 2944

FOR ILLUSTRATIVE PURPOSES ONLY. IMPORTANT NOTE: FOR SAFE AND TROUBLE FREE INSTALLATION

visit mrsteam.com or scan the QR code before installation to download the Installation, Operation and

Maintenance Manual or refer to the manual provided with the unit.

MODEL SHAPE FINISH PROJECT INFORMATION

MS BUTLER 1



RD Round



PC - Polished Chrome

MS BUTLER 2



SQ Square



BN - Brushed Nickel



PN - Polished Nickel



ORB - Oil Rubbed Bronze



BB - Brushed Bronze



PB - Polished Brass



RAW -

Custom Plating

Notes:

Location:

Architect:

Engineer:

Contractor:

Submitted By:

Date:

BUTLER PACKAGE 1

For models MS 90E to MS SUPER 3E

BOX CONTENT

• iTempoPlus

Control

• AromaSteam Steamhead

• AutoFlush

• iGenie

Remote Control (white)

• Drip Pan

BUTLER PACKAGE 2

For models MS SUPER 4E to MS SUPER 6E

BOX CONTENT

Same as Butler Package with

an additional AromaSteam Steamhead,

AutoFlush, and Drip Pan.

steam

Technical Specifications

Butler Package

Summary of content (6 pages)

PAGE 1
mr.steam ® Technical Specifications Butler Package ® BUTLER PACKAGE 1 For models MS 90E to MS SUPER 3E BOX CONTENT • iTempoPlus® Control • AromaSteam Steamhead • AutoFlush® • iGenie® Remote Control (white) • Drip Pan BUTLER PACKAGE 2 For models MS SUPER 4E to MS SUPER 6E BOX CONTENT Same as Butler Package with an additional AromaSteam Steamhead, AutoFlush, and Drip Pan. FOR ILLUSTRATIVE PURPOSES ONLY. IMPORTANT NOTE: FOR SAFE AND TROUBLE FREE INSTALLATION visit mrsteam.
PAGE 2
mr.steam ® T E C H N I C A L S P E C I F I C AT I O N S BOX CONTENTS: iTempoPlus™ CONTROLS iTempoPlus™ controls flush mount in the steam/shower enclosure through a 2 5⁄8” wide x 3 7⁄8” high hole. iTempo controls can also be surface mounted.
PAGE 3
mr.steam ® Technical Specifications AromaSteam Steamhead ROUND 103937 / SQUARE 7/8” • Even distribution of steam while remaining cool to the touch • No field assembly required • No moving parts • Integrated aromatherapy oil well for in shower use 1” 31/2” 3” 3” 23/4” 0 3” 1/8" minimum clearance required when Acrylic Shield is used. See installation instructions provided with the Acrylic Shield.
PAGE 4
mr.steam ® Technical Specifications AutoFlush ® AutoFlush Shown Fully Assembled Box Contents • AutoFlush Valve with Cord • Installation instructions Operation The optional AutoFlush System feature automatically drains the Mr.Steam® system following each use. A time delay allows the water to cool down (about two hours) before it drains by gravity for a safe and gentle operation.
PAGE 5
mr.steam ® iGenie Technical Specifications ® BOX CONTENT iGENIE INTERFACE MODULE INSTALLATION • Connect the iGenie Interface Module to the generator by plugging in the provided 5 foot cable to the iGenie Interface Module and the Steam Genie connector on the side of the generator as shown. • Installation and • iGenie® Operation Instructions • iGenie Wall Mount • A wall mounted magnet • Interface Module is provided with the • 2 Module mounting Screws iGenie control as an • 5 ft.
PAGE 6
mr.steam ® Technical Specifications Drip Pan MS 103867 Mr. Steam strongly recommends the use of a drain pan in the unlikely event of a plumbing leak. Locate the drain pan on a solid level surface and place the steam generator inside the drain pan. Insure the steam generator is level. All plumbing shall be performed by a qualified licensed plumber and in accordance with applicable national and local codes. Check local plumbing code for receptor, trap and vent requirements. Drain pans drain by gravity.