International Computer Hardware User Manual

CX-MB-EVA2 User's Manual Hardware
27
4.7 JILI Interface
4.7.1 Standard JILI Connector
A standard JILI connector can be used alternatively for connection of LCDs.
Both, single and dual channel LCDs, can be connected to the base board via small
adaptor boards.
Specification:
 References: X16
 Connector: Hirose FH12-40S-0.5SV
 Pinout: "standard JILI" according to JILI specification [4]
4.7.2 JILI40 Connector
Any LCD display can be connected via an adaptor board to the JILI40 connector.
Two 24 bit LVDS channels are available on this 40-pin header
Specification:
 References: X46
 Connector: Samtec TMM-120-01-LM-D-SM-P
 Pinout: "JILI40" according to JILI specification [4]