International Computer Hardware User Manual

CX-MB-EVA2 User's Manual Hardware

4.10.1.1.3 Compact Flash Interface

A socket for compact flash cards, type I/II, is provided at the primary IDE channel.

The compact flash interface supports True IDE mode according to compact flash

specification rev. 3.0.

Inter alia the compact flash specification rev. 3.0 supports the UDMA mode.

Specification:

 References: X24

 Connector: Yamaichi CF050P2-003-10-D2

 Pinout: Refer to specification "CF+ & CF specification rev. 3.0"

[7, page 24, table 4]

4.11 SATA-Interface

Up to four SATA drives can be connected to the SATA interfaces.

Note : Depending on the COM Express module used, not all SATA ports are available.

Every SATA signal connector has its own power supply connector.

SATA Channel References

SATA 0 X25

SATA 1 X26

SATA 2 X27

SATA 3 X28

Table 18 Assignment SATA Channel to Connector Reference

Specification SATA signal connector:

 References: X25 - X28

 Connector: Molex 87713 series

 Pinout: Refer to Specification SATA

[8, page 46, table 3]

Specification Power Supply:

 References: X49 - X52

 Connector: AMP 171825-4

 Pinout: Refer to ATX specification V2.2

[2, "Floppy Drive Power Connector"]