This guide is meant to get you up and running fast and seamlessly. If you have WTFast preinstalled on your machine, please proceed. If you do not, please go here: https://www.wtfast.com/Download/Start to download and install WTFast. After you login to the client, you will be taken to the Game Select screen, the relevant section of which is shown below. Here you would select the desired game.
Here, in Network , on the Game Select screen, select “Manually customize network route” as shown below. For best results, if you know the region of the game server where you will be playing, we recommend choosing the game server location with (Choose Best) selected. For example, Los Angeles (Choose Best). To determine which servers are closest to you, click “Sort by Ping” .The lowest latency servers will be at the top of the list.
Next, after at least 7 minutes of connection time, the WTFast Statistics screen will show statistics of the connection. The top section of that screen looks like this. Here, you can see the WTFast connection latency as the green graph, and the corresponding Internet connection in red. In this case the WTFast latency is lower than the Internet, showing connection improvement. Also, below the Ping Graph , there is the Lost Packets graph.
In this case, both the WTFast 10 Sec Ping and Ping Average are lower than those for the Internet. The bar graphs to the right of those entries show the percentage improvement of WTFast over the Internet. The Lost Packets entry will show, numerically, the amount of packets lost in each connection, and the bar graph to the right will show the percentage improvement of WTFast packet loss over the Internet connection.