Where Luxury Is Affordable / Où le Luxe est abordable Owner′s Manual / Guide de l’utilisateur B-090 B-100 B-110 B-120 B-121 B-091 Alpine Nest B-112 Silver Cloud Oasis B-141 Castello B-130 B-131 B-132 B-140 B-150 Camaro / Super Camaro B-151 Luxury Exotic B-152 Birkin Elegance DO NOT RETURN MERCHANDISE DIRECTLY TO YOUR ORIGINAL SELLING STORE. CALL MSPA AFTER SALES SERVICE CENTER FOR ANY PRODUCT QUESTIONS. CONTACT US AT info@the-mspa.
！ WARNING For your own safety and that of your equipment, make sure to take the following precautions. Failure to follow warning notices and instructions may result in property damage, serious injury or death. Improper installation or operation will void the warranty When install or use this equipment, basic safety precautious must be followed, including the following: IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS WARNING: RISK OF ELECTRIC SHOCK.
WARNING: Do not expose spa under direct sunshine. WARNING – This product is provided with a ground-fault circuit-interrupter in the plug. The GFCI must be tested before each use. With the product operating, open the service door. When the product stops operating, this merely indicates that the door is equipped with an electrical interlock. Next, push the test button on the GFCI and close the service door. The product should not operate.
A green coloured terminal or a terminal marked G, GR, Ground, Grounding, or the symbol* is located inside the supply terminal box or compartment. To reduce the risk of electric shock, this terminal must be connected to the grounding means provided in the electric supply service panel with a continuous copper wire equivalent in size to the circuit conductors supplying this equipment. * IEC Publication 417, Symbol 5019.
The effects of hyperthermia include (a) unawareness of impending hazard; (b) failure to perceive heat; (c) failure to recognize the need to exit spa; (d) physical inability to exit spa; (e) fetal damage in pregnant women; and (f) unconsciousness and danger of drowning. WARNING: THE USE OF ALCOHOL OR DRUGS CAN GREATLY INCREASE THE RISK OF FATAL HYPERTHERMIA IN HOT TUBS AND SPAS WARNING: TO REDUCE THE RISK OF INJURY: Never pour water which higher than 40°C(104°F) into the spa pool directly.
SPECIFICATIONS Bubble Spa Style No. B-090 Seating capacity 2 Shape Square B-091 +2 4 +2 Square B-100 B-110 B-120 B-121 B-130 B-131 B-132 B-140 B-112 B-141 B-150 2 4 4-6 Oval Round Round B-151 B-152 Water Capacity (Approx.) 650 L/171 gallon 930 L/245 gallon 550 L/145 gallon 700 L/184 gallon 930 L/245 gallon Outside Dimensions 1.58 m/62” 1.85 m/73” 1.86x1.25 m/73.5”x49.5” 1.80 m/71” 2.04 m/80” Inside Dimensions 1.28 m/50.5” 1.45 m/57” 1.46x0.85 m/57.5”x33.5” 1.
A. Site Requirements WARNING: The floor has to be capable of supporting the expected load. WARNING: An adequate drainage system has to be provided to deal with overflow water. IMPORTANT: Because of the combined weight of the spa, water and users, it is extremely important that the base where the spa is installed is smooth, flat, level and capable of uniformly supporting the weight for the entire time the spa is installed.
C. Assembly a) Unfold the Spa pool from the packaging. Spread the Spa, cover and temp barrier mat. Make sure Spa and cover are right side up. Put temp barrier mat under Spa(optional). Note: B-100 includes a side bar, which needs to be placed before filling water to the tub. The side bar helps keeping the spa pool in its proper shape after filling. Temp barrier mat(optional) is helpful to avoid heat loss from bottom and provide better heat preservation together with inflatable bladder(optional) being used.
h) Please check and test the air pressure status inside the spa pool in the following way: Please read the dial plate of manometer. If it points to yellow sector, the spa is well inflated. You may fill in water now. TO AVOID OVER INFLATION CAUSED BY WARM WEATHER OR SUNSHINE WHEN LEAVING MSPA FOR WEEKS INFLATED AND FILLED WITH WATER IN TEMPERATURE HIGHER THAN 20°C, PLEASE REDUCE THE AIR PRESSURE TO THE YELLOW SECTOR OF MANOMETER.
l) Place the zipper cover onto the spa and then put the inflatable bladder onto the spa pool, Fasten the zipper and lock the cover to the spa by using the digital lock in the accessory pack. Note: Please remember to test and adjust the air pressure inside of spa pool before each time of use. Please cover zipper with wax once a week so as to make it smooth for operation and avoid split.
LED Display: Once powered-up, the LED displays the current water temperature automatically. NOTE: The setting temperature defaults to 38°C (100°F) when first plugged in. NOTE: Temperature adjustment ranges from 20°C (68°F) to 40°C (104°F). Set your desired temperature by pressing “TEMPERATURE” Button. Note: In case when leaving spa under unattended working condition, you can press up “ ” &. down “ ” buttons at the same time to lock the conttrol panel to avoid any misoperation by children.
C: Change water every few days or use appropriate pool chemicals. All spas require the use of pool chemicals. Please consult your local pool supply retailer for more information about chemical maintenance. Pay close attention to the chemical manufacturer’s instructions. Spa damage resulting from misuse of chemicals and mismanagement of spa water is not covered by the warranty. a. Water Balance: we recommend maintain your water pH between 7.2 and 7.
Drainage 1. Turn off all the buttons on the control panel. 2. Unscrew the valve on outside of the spa pool till it is detached from the drainage structure. 3. Connect the black drainage hose on to the drainage structure. Make sure it is well connected and the other end of the drainage hose is connected to a ground drain. 4. Pull and open the cover of the drainage structure inside of the spa pool, water will flow out from the drainage hose. 5. Tilt the spa until no water flow out to empty the spa completely.
TROUBLESHOOTING Mspa® strives to provide the most trouble-free spas on the market. If you experience any product related problems, do not hesitate to contact us or your local after sales service center. Here are some helpful tips to help you to diagnose and rectify some common sources of trouble. *For any spare parts you need for replacement, please refer to the warranty policy for replacing details.
MSpa® products are designed with reliability and simplicity in mind. In addition, our internal Quality Assurance Team carefully inspects each unit thoroughly before it leaves our facility. Oriental Recreational Products (Shanghai) Co., Ltd. (ORPC) is pleased to extend this limited warranty coverage to the original purchaser of an MSpa® Product. This warranty is not transferable. The warranty period commences on the original purchase date through 6-12 months accordingly.
Damages caused by or attributable to the following incidents are specially excluded: a. Any damage caused by the operation of the spa with water temperatures outside the range of 0°C-42° C/32°F-107.6°F (Europe/Australia) or 0°C-40°C/32°F-104°F (USA) b. Any damage caused by clogged, dirty or calcified filters c. Any damage that are purely aesthetic and do not hinder the function of the MSpa d.
MSpa® Warranty Registration Card Congratulations on purchasing a quality MSpa® product! To get the most value from your investment, please fill in the Warranty Registration Card below. By submitting this form, your warranty will be registered. *Note: Incomplete form will not to be accepted and honored by MSpa.
