Manual

(OK)
10° Slope
(TOO STEEP)
10° Slope
Figure 1
USETHiSSLOPEGAUGETODETERMINE
iFA SLOPEiSTOOSTEEPFORSAFEOPERATION!
Tocheckthe slope,proceedas follows:
1. Removethis pageandfold alongthe dashedline.
2. Locateavertical objectonor behindthe slope(e.g.a pole,building,fence, tree,etc.)
3. Aligneither sideof the slopegaugewiththe object(SeeFigure1 andFigure2 ).
4. Adjustgaugeup or down until the left cornertouchesthe slope(SeeFigure1 andFigure2).
5.
10odashedline
If there is a gapbelowthe gauge,the slope is too steepfor safeoperation(SeeFigure2 above).
Figure2
Slopes are a major factor related to tip-over and roll-over accidents which can result in severe injury or death. Do not operate machine
on slopes in excess of 10 degrees. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not
mow it. Always mow up and down the face of slopes, never mow across the face of slopes.