Operating instructions

ManualsBrandsMTD ManualsBrush CutterTBBC

OPERATING THE EZ-UNK TMSYSTEM

The EZ-LinW M system enabHesthe use of these optionaH

Add-Ons.

Cultivator ................................ TBGC

Edger ................................... TBLE

Hedge Trimmer ........................... TBAH

Straight Shaft Trimmer ...................... TBSS

Turbo BHower ............................. TBTB

PorteSaw ................................ TBPS

Brushcutter .............................. TBBC _

*Do NOT use this attachment with an electric

powered product.

WARNING: Beforeyoubegin

usingany

attachment,readand understandthe manuaH

thatcame withtheattachment.FollowaHH

safetyinformationcontainedwithin

Removing the Cutting Attachment or Add-Ons

1. Turn the knob counterclockwise to Hoosen(Fig. 9).

2. Press and hoHdthe reHeasebutton (Fig. 9).

3. While firmHy hoHding the upper shaft housing, puHH

the cutting attachment or add-on straight out of the

EZ-Link TM coupHer (Fig. 10).

WARNING: Toavoidserious

personaHinjuryand

damage totheunit,shuttheunitoffbefore

removingorinstaHHingadd-ons,

Installing the Cutting Attachment or Add-Ons

NOTE: To make instaHHingor removing the add-on

easier, pHacethe unit on the ground or on a work

bench.

1. Turn knob counterclockwise to loosen (Fig. 9).

EZoLinkTM Coupler Re_easeSutton

Guide Recess

Fig. 9

2. WhiHefirmHyhoHding the add-on, push it straight into

the EZ-Link TM coupHer (Fig. 10).

NOTE: AHigning the reHeasebutton with the guide recess

wiHHheHpinstaHHation(Fig. 9),

Release Sutton

EZ-Link TM Coupmer Primar Hole

Upper Shaft Housing Lower Shaft Housing

Fig. 10

3. Turn the knob cHockwise to tighten (Fig. 11),

, Lock the reHease

• button in the primary

home (Fig. 10) and secureHy tighten the knob

before operating this unit.

90°Edge

Trimming Home

Fig. 11

, The add-ons with the

• coupHer system is to

be used in the primary hoHeonly. Using the

wrong hoHecouHd Headto personaH injury or

to the unit.

For decorative trimming/edging with the line head cutting

attachment, Hockthe reHeasebutton of the cutting

attachment into the 90° hoHe (Fig. 11).