Owner Manual

Installation and Operational Manual
°
Designer Collection
°
Acrylic Freestanding Tubs
mtibaths.com / 14mtibaths.com / 14
1st Press: System on. LED light on.
2nd Press: System off. LED light off.
System heats to optimal temperature within 20-60 minutes, depending upon ambient
temprature. The cooler the room temperature or tub shell, the longer it may take to feel
the affects of the shell warming feature.
System will turn off in the event of a power surge or power failure. Must have access
to transformer box for future servicing — test prior to installing.
Independent Chromatherapy
Independent Radiance®
Stereo HO
Power, song selection and volume are controlled by user’s mobile device and/or home audio system amplifier.
Stereo HO with Bluetooth
Use the touch pad that comes standard with the system to turn
on and off the provided amplifier. The mobile device paired with
the Bluetooth-ready amplifier will automatically connect. Song
selection and volume are controlled via the paired mobile device.
Bluetooth Remote Control (Optional): Optional remote control
enables user to power Stereo HO on and off, control volume,
and select songs from paired mobile device via previous and next
buttons on the waterproof remote control.
If more than one device has been paired with the amplifier, the
last one to connect to the system will have priority. System will
turn off automatically 15 minutes after music has stopped playing.
Operational Videos
Please visit mtibaths.com/support/installation-operation/ for detailed operation instructions.
ON/OFF: PRESS THE ON/OFF BUTTON
LIGHT MUST BE ON FOR ANY MODE TO FUNCTION
1st Press: White light. LED light on
(White is only available when the system is initially turned on).
2nd Press: Light off. LED light off.
MODE BUTTON
1st Press: Aqua-Blue-Green Cycle. - First cycle 1.5 seconds between color changes; then
slows to 6 seconds between color changes.
2nd Press: Rainbow Cycle - Colors change from Aqua-Blue-Magenta-Red-Orange-Yellow-Green.
First cycle 1.5 seconds between color changes; then slows to 6 seconds between
color changes.
3rd Press: Pressing the Mode button a third time will stop the system on the color displayed.
To change the color, use the up & down buttons to go through each color change
in small increments. (Or, turn light off and begin again.)
UP & DOWN
Pressing the up or down arrow will allow the lights to change through the basic colors:
Aqua → Blue → Magenta → Red → Orange → Yellow → Green
CYCLE MODES
Press and hold up or down to adjust cycle speed. Release pressure at desired speed.