Instructions

Instruction Manual -
Time switch
en
16. Cycle
Standard weekly program:
For the cycle function it is possibile to enter a periodic switching time. The time switch acts as a recycling timer and
switches between pulse (ON) and pause (OFF). The max. value for pulse and pause is 9:59:59 h:mm:ss.
PROGRAM PROGRAM NEw Channel A/B/C/D STANDARD ...
Special (weekly) program (to be activated by date for the yearly function):
PROGRAM PROGRAM NEw channel A/B/C/D Special program ...
SP-Entry
Program-number
If you haven’t defined and activated a cycle, the cycle function will not be available as switching time. Therefore you
have to activate and define at least one of the four cycles within menu Options and sub-menu CyCLE (point 17).
c
c
18. Impuls
The pulse function provides you the opportunity of programming a switching time with a defined duration. As soon as the pulse-duration
has expired the time switch switches OFF automatically (the duration of the pulse is up to 59:59 mm:ss).
Special program (to be activated by date for the yearly function):
Choose pulse-Function.
Define the on time (Time hour / time Minute).
Define the days of the week for your pulse switching time.
Define the duty cycle (Pulse Minute / pulse Second).
17. Cycle options
You have the possibility to define 4 different Cycles. For these purposes choose menu Options and sub-menu Cycle. The different cycles
can be activated, defined or deactivated (the max. value for pulse or pause is 9:59:59 h:mm:ss):
Options ...cYcLe
cYcLe 1-4
c
The cycle is now offered within the programming menu.
c
Further applications of the cycle function in combination with: External input
Choose menu Options and sub-menu Cycle and confirm with s.
Select with r q-buttons one out of the 4 cycles (Cycle 1 – 4) and confirm with s.
Activate the cycle by changing No to yes with r q-buttons and subsequent confirming with s.
Define duration of the pulse „On time“ ( r q s...).
Define duration of the pause „Off time“ ( r q s...).
Confirm End with s.
19. Permanent program
The permanent by date program (holiday program) is a permanently on or off status of the channel for the programmed dates. The
number of switching times is only limited by the total number of free memory locations. Adjust channel, switching function and the
start/end time (date and time). The following options are additionally available for the permanent by date program (within yearly
time switches):
FUNcTION STANDARD: Special program will be applied each year fixed to the entered dates and times
Function easter: The time switch takes into account the yearly shift of the Easter holiday for following years and corrects the
activation dates. (For programs relative to Easter, Pentecost Carnival, Ascension,...)
Function with year: Special program is executed once by date with year and time (“century function“ - requires 2 memory
locations)
These programming steps are single switching times by date. Extra switching times do not disable switching programs with lower priority.
PROGRAM PROGRAM NEw channel A/B/C/D extra switching ...
options extra switching eS yes SAVE
Activation of extra switching times:
Adjust the switching function (ES on, eS off, eS cyklc, eS pulse) and the start/end time (date and time). The following options are
additionally available for the Extra switching time (within yearly time switches):
25. Additional adjustments
Menu
Main menu
Application
Program query
Program delete
Date - time
Summertime
language
factory defaults
Counter
PIN-Code
Program
To query the programming steps and remaining memory locations.
Adjustments
Deletion of switching time(s). The program for all channels, single channels and
single programming steps within on channel can be deleted.
Program
Adjustment of date and time
Adjustments
Adjustment of the daylight saving time mode (ON/OFF)
Adjustments
Choice of languages
Reset to the state of delivery. c Date, time and switching program will be lost!
Adjustments
Options
Displays the hour counter and pulse counter for each channel and the time
switch itself.
Options
The time switch can be locked with a 4-digit PIN-Code. The code can be
adjusted, activated and deactivated. If you have forgotten the Code please
call customer service.
The external input can be connected to a switched contact such as a push-button or light switch. Therefore you can activate and
de-activate functions from a remotelocation or automatically from a control system:
Functional options of the „external input“:
options input
...
CONNECTION external inputs:
CONNECT THE VOLTAGE/FREQUENCY AS STATED ON THE PRODUCT LABEL!
EXTERNAL INPUT 1: A switch or pushbutton can be connected to EXT 1: Terminal 6 (Voltage EXT 1 = Supply voltage of the
time switch)
c
c
Within menu Options and sub-menu Input you have to define if a switch or a push-button-signal will be applied to the external input.
Furthermore you can choose the channel(s) which react to the external signal:
Using the r q-buttons to select if you are connecting a pushbutton or a switch and confirm by pressing s.
Select the channel(s) which will be controlled by the external signal with the r q-buttons (channel … yes) and confirm by pressing
s. Channels which should not be controlles by the external signal remain deyctivated (channel … No). Then press s to confirm.
26. Programming via Bluetooth
22. External Input Switch / Pushbutton
f
OK
f
0
12
24
Options
Switch
f
OK
f
0
12
24
input
f
OK
f
0
12
24
yes
/ No
OK
M
pushbutton
permanent
On
Permanent
oFF
SP-
activation
OK
M
channel ...
Kanal ...
f
OK
f
0
12
24
Options
Switch
f
OK
f
0
12
24
input
f
OK
f
0
12
24
Channel ...
yes / No
OK
M
pushbutton
change-
Function
T
imer-
Function
staircase
Lighting
OK
M
Change-funcTion: The switching state of the linked channel is changed by an external input signal (ON -> OFF or OFF -> ON). This corresponds to a manual over-ride.
sTaircase lighTing: The corresponding channel is switched ON by an external input signal and the timer starts. After the timer time has expired, the channel switches OFF.
If the channel receives another signal, while the timer is active, the time switch reacts as follows:
You have the option of specifying the functionality of the individual channels. If you have assigned one of the functions to the channel, you can use a trigger signal at the external input (switch or
pushbutton, if activated). You can define one of the following functions for each channel:
Sp-AcTivaTion: An external Input (switch) switches the time switch according to the special program ON / OFF.
Perm on: An external Input (switch) switches the time switch permanently oN. This switching state is started and ended by pressing the switch.
Perm off: An external Input (switch) switches the time switch permanently OFF. This switching state is started and ended by pressing the switch.
Switch
Pushbutton
reseTTable: External input signal (pushbutton) = Timer is switched off
24. Astro function
23. Priorities of the switching programs
Standard switching times, Special programs, Extra switching times and Permanent by date are
executed according to their corresponding priority (by channel and date).
All switching programs except Extra switching times, suspend all other switching programs with
lower priority:
Highest Priority
Lowest Priority
Manual over-ride Permanent (3 sec. push)
Permanent by date
Extra switching time
Special programm 10 by date (yearly time switch)
Special programm 01 by date (yearly time switch)
Standard weekly program
Ext. Input switch
Ext. Input pushbutton
Switchoff warning:
Smartphone App
Windows App
staircase Lighting Resettable / Switched off Advance warning ...
In the menu Options you will find the sub-menu Advance Warning. You can make the following settings:
No: The function remains inactive.
Yes: The function is activated and the switch off is signalled in advance (For illumination purposes the
warning is signalled by the flashing of the light according DIN 18015-2 = warning to avoid sudden darkness).
c
c
xx min 10 sec 30 sec
Program Simulation
Program
Simulation of switching time(s). You have the option to simulate the switching
times for a specific date/period.
AdjusTmenTs Astro-Data channel A/B/C/D ...
Within the menu sETTINGs you have the option to use the astro function for the different channels.
After activation you have the two options:
AsTro preprogrammed YES: There will be created an Astro-ON and an Astro-OFF switching time
with offset 00 for all weekdays.
AsTro preprogrammed NO: The astro function is now available when programming a new
switching program for the selected channel.
The astro function allows you to switch the whole year through in relation to sunset and sunrise, e.g. for illumination purposes (AsTro-On with sunset and AsTro-off)
with sunrise). While programming an astro programm step there will be no daytime (hh:ss) suggested. Instead of this you have to enter an offset.
Additionally, with NIghT-Off and NIghT-On can be defined a period for switching the time switch OFF / ON.
Sunset
Sunrise
astRO oN astRO off
20. Extra switching time
night oFF / ON
21. External Input
f
OK
f
0
12
24
18.06.2020
9:28
00
MONday
f
OK
f
0
12
24
18.06.2020
9:28
00
MONday
WIN
APP
BT active
BT active
bt
bt
This setting has a review, i.e. if the external input signal is deactivated, the saved standard switching program becomes active.
c
c
If the astro function is activated, existing switching times for the selected channel are deleted.
Timer-FuncTion: The corresponding channel is switched ON by an external input signal and the timer starts. After the timer time has expired, the channel switches OFF. Another press
of the pushbutton, when the timer is active, also switches OFF.
swiTched off: External input signal (pushbutton) = Timer is restarted
Special programm .... by date (yearly time switch)
The cycle switching time will be terminated by another switching time (on, off, pulse) or by another cycle switching time.
Standard weekly program:
PROGRAM PROGRAM NEw Channel A/B/C/D Standard ...
PROGRAM PROGRAM NEw Channel A/B/C/D permanent ...
FUNcTION STANDARD: Special program will be applied each year fixed to the entered dates and times
Function easter: The time switch takes into account the yearly shift of the Easter holiday for following years and corrects the
activation dates. (For programs relative to Easter, Pentecost Carnival, Ascension,...)
Function with year: Special program is executed once by date with year and time (“century function“ - requires 2 memory locations)
PROGRAM PROGRAM NEw channel A/B/C/D Special program ...
SP-Entry
Program-number
[SC88.x0pro4 / SC98.x0pro4]
www.hugo-mueller.de
Hugo Müller GmbH & Co KG, Karlstraße 90, DE-78054 VS-Schwenningen
BA SC88 SC98pro4 HM; de,en -24132- 2020.06V01