- Power Measurement Modem User's Guide

ION 7500 / ION 7600 User’s Guide ION Setup Software Security
ION Security Technical Note Page 253
ION Setup Software Security
ION Setup provides a four-level security access system. Supervisor-level
personnel can control access and define which functions are available to each user
by grouping the user according to security level, as follows:
Supervisor: This level is for management or supervisory personnel. This permits
access to all device configuration functions, including the security list, system/
network configuration, and data display functions.
Operator: This level is for high level system operators. This permits access to
system configuration and data display functions. Operators should be well trained
in operating ION Setup.
Controller: This level allows a controller to display data but not to change ION
Setup or meter configuration. This level also allows a controller to operate triggers.
User Security level 1: This is suitable for personnel that use ION Setup on a regular
basis and who inform Supervisors or Operators of alarm conditions.
Entering the software user name and password
1. Enter your valid user account information when prompted with this window:
The default password is zero (0) and the default user has Supervisor access.
Creating or modifying ION Setup user accounts
1. Launch ION Setup and log on with Supervisor access.
2. Connect to the appropriate meter and double-click the Setup Assistant.