- Power Measurement Modem User's Guide

ION 7500 / ION 7600 User’s Guide Te ln e t M e nu
Telnet and HyperTerminal Access Technical Note Page 333
Telnet Menu
The Telnet menu options are:
Logout – select this option to logout of the meter, and end the Telnet session.
Ethernet Settings – there are two options in this menu: one for viewing your
current communications settings and one for configuring your IP Boot option, IP
address, Subnet mask, Gateway address and SMTP address.
Ethernet Stats – there are three options available in this menu: one for viewing
various Ethernet statistics, one for viewing an Ethernet collision histogram, and a
third option for resetting these statistics.
Meter Clear Functions – there are two options available in this menu: one returns
you to the Main Menu, and one clears the meter Event Log Display.*
* The Meter Clear Functions option is only available for the ION 8000 Series meters.
Switch to Debug Parser (and route msgs to telnet) – there are eight screens with
options available in this menu: Help; All Commands; Display Comm Help;
Miscellaneous Help: Reset Help; Security Help; Time Help; and Calibration Help.
In addition, the Factory Login and Logout menus are available.
Factory Login – this menu is reserved for Technical Services use.
To access menus:
1. You can view the list of menus at any time by typing a question mark (?) and
pressing Enter.
2. To access a menu, press the corresponding number on your keyboard, then press
Enter.
0) Logout
1) Ethernet Settings
2) Ethernet Stats
3) Meter Clear Functions
4) Factory Login
9)
Switch to Debug Parser (and
route msgs to telnet)
?) Displays this menu