- Multi-Tech Broadband Router User Guide

Chapter 6 – RouteFinder Monitor
RouteFinder RF500S User Guide 104
Chapter 6 - RouteFinder Monitor
RouteFinder Monitor is a software utility that provides both monitoring and troubleshooting
functions for the RF500S.
How to Start the RouteFinder Monitor program.
1. Click on the RouteFinder Monitor icon on your desktop, or select Start | Programs |
RouteFinder Utilities | RouteFinder Monitor.
2. The RouteFinder Monitor main screen displays. It opens on the TCP/IP Tab.
Note: If you receive a message stating “Device is not found”, refer to the Troubleshooting
chapter in this User Guide.
Event Messages are displayed in the lower half of the screen. Event Messages provide
information about the communication occurring between your network device, ISDN
TA/modem and the remote server (ISP).
To assist you in troubleshooting, you may point and click on any event message to bring
up a help screen.