- Multi-Tech Broadband Router User Guide

Chapter 6 – RouteFinder Monitor
RouteFinder RF500S User Guide 109
RouteFinder Monitor Main Screen Buttons
Refresh Device List Button
Click Refresh Device List button from the RouteFinder Monitor main screen to re-display a
list of network devices in the
Available Devices window.
Test Connection Button
Click the Test Connection button to run a test of your connection settings. This test can
assist you in determining if problems are due to the modem, the RouteFinder, or an
incorrect setting.
Test Connection uses the attached modem(s) to dial-up the remote
server (ISP) and establish a connection.
Select Connect Port 1 to test the WAN connection, or select Connect Port 2 to test the
Async connection. The results of the test are displayed in the text box of this screen.
Click
Exit to close the Test Connection screen.
Terminate Connection Button
The Terminate Connection option is designed to allow the Network Administrator to
terminate an RF500S connection instantly.
Select Disconnect Port 1 or Disconnect Port 2, and then click the Exit button.