- Multi-Tech Broadband Router User Guide

Appendix E – Writing a Login Script
RouteFinder RF500S User Guide 130
Example 3 : Script for Unreliable ISP (2
nd
ISP backup)
# Login Script Meaning of Each Login Script Command
1 Send”ATZ” Resets modem
2 Send”ATS0 =1” Sends initial string ‘ATS0 =1‘ to modem
3 Send”ATDT8881234” Dials phone number 888-1234
4 Wait”CONNECT” 12 Waits for ISP to send reply ‘CONNECT’. If no reply, goes to line 12
for ISP #2.
5 Wait “username:” 12 Waits for ISP to send reply ‘username’. If no response, goes to line
12 for ISP #2.
6 Send”JaneDoe” Sends the username ‘JaneDoe‘ to ISP
7 Wait”password” Waits for ISP to send reply‘ password‘
8 SH”1234” Sends password ‘1234‘ to ISP
9 Wait”====>” Waits for ISP to send reply ‘===>‘
10 Send”1” Selects option 1 (PPP) for this ISP
11 Go Starts PPP mode (Rest of script ignored)
12 Hangup Hangs up Modem
13 Send “AT S0=1” Sends initial string ‘AT SO=1’ to modem
14 Send ‘ATDT 8885678’ Dials phone number 888-5678 (ISP #2)
15 Wait ‘Connect’ 23 Waits for ISP to send reply ‘CONNECT’. If no CONNECT, goes to
line 23.
16 Wait “username:” 23 Waits for ISP to send reply ‘username’. If no response, goes to line
23.
17 Send “Stephen” Sends the username ‘Stephen’ to ISP
18 Wait “password:” Waits for the ISP to send ‘password:’
19 SH “5678” Sends password ‘5678’ to ISP
20 Wait”====>” Waits for ISP to send reply ‘===>‘
21 Send”1” Selects option 1 (PPP) for this ISP
22 Go Starts PPP mode
23 Hangup Hangs up Modem
24 Jump 2 Goes back to line 2 to re-dial ISP#1