- Multi-Tech Broadband Router User Guide

Chapter 3 – Configure and Manage Using a Web Browser
RouteFinder RF500S User Guide 33
– Static Routing
Routing is the process of moving packets of data from source to destination. Use this
screen to create a routing table to connect your network to another, or to connect subnets
within your network.
1. To access this screen, click the
Static Routing button on the left side of the screen.
The
Static Routing Table screen displays.
2. Enter the details for each entry in the routing table. Click the
Add button after each
entry.
Destination IP Address – The address of the remote network to which you want
to assign a static route.
Subnet Mask – The Subnet Mask of your network IP address.
Gateway IP Address – The IP address of the interface used to link to the remote
network.
The entries display on the lower half of the screen. To change an entry, click the
Delete
(Del) button, and then re-enter the information.
3. When the table is complete, click the
Submit button.