- Multi-Tech Broadband Router User Guide

Chapter 4 – Software Installation and Configuration
RouteFinder RF500S User Guide 58
7b. If you selected IP Routing (NAT Enabled or Disabled) from the Asynchronous Port Function
screen, the IP Routing screen displays.
Figure 9 – IP Routing
Enter the information required to dial-up and login to your ISP’s remote server:
• Enter the
Telephone number used to dial your remote server (ISP).
Note: If you must dial a number to get an outside line (e.g., 9, or 0), enter the
required number plus a w (wait) or a comma in the
Telephone box. (e.g., 9w555-
2323 or 9,,5552323). Each comma provides a 3-4 second delay.
• Enter the
User Name for your remote server or ISP account.
• Enter the
Password for your remote server or ISP account.
• For
Password Verification, re-enter the password for your remote account.
Click Next>>.