OPERATION AND PARTS MANUAL COLLOMIX Hand Mixers CX100HF CX100HFE CX300HF CX400HFE CX600HF CX600HFE Revision #3 (03/11/08) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
CX-HF HAND MIXERS — SILICOSIS/RESPIRATORY WARNINGS WARNING WARNING SILICOSIS WARNING RESPIRATORY HAZARDS Grinding/cutting/drilling of masonry, concrete, metal and other materials with silica in their composition may give off dust or mists containing crystalline silica. Silica is a basic component of sand, quartz, brick clay, granite and numerous other minerals and rocks.
CX-HF HAND MIXERS — TABLE OF CONTENTS STOW CX-HF SERIES HAND MIXERS Silicosis/Respiratory Warnings .................................. 2 Table Of Contents ..................................................... 3 Parts Ordering Procedures ....................................... 4 Safety Message Alert Symbols ................................. 5 Rules For Safe Operation ...................................... 6-7 Symbols Used ........................................................... 8 Specifications ...........
CX-HF SERIES HAND MIXERS — PARTS ORDERING PROCEDURES When ordering parts, please supply the following information: ❒ ❒ ❒ ❒ ❒ ❒ ❒ Dealer account number Dealer name and address Shipping address (if different than billing address) Return fax number Applicable model number Quantity, part number and description of each part Specify preferred method of shipment: ✓ FedEx or UPS Ground Note: Unless otherwise indicated by customer, all ✓ FedEx or UPS Second Day or Third Day orders are treated as “Standard Orders”,
CX-HF SERIES HAND MIXERS — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. This Manual has been developed to provide complete instructions for the safe and efficient operation of the STOW CX-HF SERIES HAND MIXERS.
CX-HF SERIES HAND MIXERS — RULES FOR SAFE OPERATION DANGER Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the Multiquip CX-HF Series Hand Mixers. GENERAL SAFETY ■ DO NOT operate or service this equipment before reading this entire manual.
CX-HF SERIES HAND MIXERS — RULES FOR SAFE OPERATION ■ DO NOT spray water onto electric motor. Do not expose equipment to rain or wet conditions. Water entering the equipment will increase the risk of electric shock. Maintenance Safety ■ Double-insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit on a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.
CX-HF SERIES HAND MIXERS — SYMBOLS USED Some of the following symbols may be used on this equipment. Familiarize yourself with them and their meaning. Proper interpretation of these symbols will allow you to operate the equipment better and safer.
CX-HF SERIES HAND MIXERS — SPECIFICATIONS Table 1. CX-HF Series Specifications Model CX100HF/CX100HFE CX300HF CX400HFE CX600HF/CX600HFE Voltage 110-120 V / 230 V 110-120 V 230 V 110-120 V/230V 800/1,000 800 1,400 1,400/1,600 1.1 1.1 1.8 1.7/2.2 Amps 7 .2 /4 . 4 7.2 6.0 1 2 . 7 /7 . 1 Gears 1 2 2 2 RPM Under Load Ge a r 1 0-790/0-670 0-470 0-500 0-490/0-420 RPM Under Load Ge a r 2 N/A 0-890 0-850 0-620/0-630 Recommended Mixing Tool Diameter 4.75 inches (120 mm) 4.
CX-HF SERIES HAND MIXERS — GENERAL INFORMATION Application The Stow CX-HF Series Hand Mixers are designed for mixing liquid and power-based products such as paints, mortar, adhesives, plaster, and similar substances used in the building industry and building-related trades. The right mixing tool should be selected depending on the consistency of the material and the quantity to be mixed. If used properly, the hand mixer will provide years of safe and reliable service.
CX-HF SERIES HAND MIXERS — GENERAL INFORMATION Paddles The CX-HF Series Hand Mixers can use different paddles depending on the application it will be used for. See table below for the available paddles. Table 3.
CX-HF SERIES HAND MIXERS — COMPONENTS 1 2 4 3 6 5 7 8 9 Figure 1. Mixer Major Components 5. Ventilation Slits — These openings allow ventilation to the unit to prevent overheating. Gear Selection Lever — This lever is used to select the gear (slow or fast) at which the unit is operating (not applicable on CX100HF/CX100HFE). 6. Safety Lock-off Button — Prevents the unit from being operated accidentally. Protection Frame Fastening Screws — Holds the protection frame securely in place. 7.
CX-HF SERIES HAND MIXERS — SETUP Assembly Before using the hand mixer, the following steps need to be performed. 1. Insert the mixing tools (see Table 3 for the different mixing tools/paddles available) into the HEXAFIX® coupling as far as necessary to lock the tools in place, automatically (see Figure 2). 2. A 120V/230V power supply can also be used. Make sure that the power supply conforms to the specifications on the nameplate of the mixer.
CX-HF SERIES HAND MIXERS — OPERATION 4. CAUTION ALWAYS hold the machine with both hands while working. 1. To start , press the starting lockout button then press the ON/OFF switch (Figure 4). The integrated electronic controls will start the machine in a controlled speed. 5. When submerging the mixing tool in the mixing material or when lifting out the mixing tool, always reduce the speed. When the mixing tool is fully submerged, increase the speed again to ensure that the motor is adequately cooled.
CX-HF SERIES HAND MIXERS — MAINTENANCE CAUTION ALWAYS disconnect the mixer from the power supply before cleaning, changing the mixing paddle or performing any maintenance. CAUTION Mixer Storage For storage of the mixer for over 30 days, the following is recommended: z Clean the mixer and mixing tool. z Cover the mixer and place it a clean dry area, that is protected from harsh elements.
EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availibility of the parts listed. * * Numbers Used - Item quantity can be indicated by a number, a blank entry, or A/R.
CX-HF SERIES HAND MIXERS — SUGGESTED SPARE PARTS CX100HF/CX100HFE/CX300HF/CX300HFE/CX400HFE/CX600HF/CX600HFE (1 TO 4 UNITS) QTY. P/N DESCRIPTION 2 ......... CM20509 ....... SPRING FOR BRUSH ASSY (CX100, CX300, CX400) 1 ......... CM20567 ....... BRUSH SET (CX100, CX300, CX400) 2 ......... CM20569 ....... BRUSH HOLDER (CX600) 1 ......... CM20566 ....... BRUSH SET (CX600) 1 ......... CM20593 ....... SWITCH ASSY (CX100, CX300) 1 ......... CM20703 ....... SWITCH ASSY (CX400) 1 ......... CM20597 .......
CX100 HAND MIXER — MIXER ASSEMBLY MIXER ASSY. 70 8 37 68 64 73 76 23 24 1 6 76 32 73 4 73 59 85 61 57 62 12 15 38 60 42 80 70 10 82 36 7 39 3 72 29 71 71 5 50 55 58 11 2 116 70 117 70 70 70 70 30 31 70 100 116 118 119 9 120 PAGE 18 — CX-HF SERIES HAND MIXERS — OPERATION AND PARTS MANUAL — REV.
CX100 HAND MIXER — MIXER ASSEMBLY MIXER ASSY. NO 1 2 3 4 5 6 7 8 9 9 10 10 11 12 15 23 24 29 30 31 32 36 37 38 39 PART NO CM20530 CM20531 CM20560 CM20552 CM20524 CM20525 CM20527 CM20601 CM20559 CM20591 CM20556 CM20592 CM20707 CM20548 CM20502 CM20687 CM20686 CM25022 CM29523 CM29522 CM25055 CM24425 CM20509 CM20608 CM20609 PART NAME QTY. REMARKS MOTOR HOUSING TOP 1 MOTOR HOUSING BOTTOM 1 GEAR HOUSING ASSY 1 PLATE ASSY 1 BAFFLE PLATE 1 RECTIFIER 1 AIR OUTLET 1 COVER, TOP 1 ARMATURE, OEM10 230V ...............
CX100 HAND MIXER — MIXER ASSEMBLY MIXER ASSY. 70 8 37 68 64 73 76 23 24 1 6 76 32 73 4 73 59 85 61 57 62 12 15 38 60 42 80 70 10 82 36 7 39 3 72 29 71 71 5 50 55 58 11 2 116 70 117 70 70 70 70 30 31 70 100 116 118 119 9 120 PAGE 20 — CX-HF SERIES HAND MIXERS — OPERATION AND PARTS MANUAL — REV.
CX100 HAND MIXER — MIXER ASSEMBLY (CONTINUED) MIXER ASSY. NO 42 50 50 55 57 57 57 57 57 58 59 60 61 62 64 68 70 71 72 73 76 80 82 85 100 116# 117# 118# 119# 120# PART NO CM20570 CM20565 CM20593 CM29534 CM23557 CM27030 CM27053 CM27035 CM27054 CM20588 CM23556 CM20584 CM20583 CM20584 CM20579 CM20567 CM25062 CM29563 CM20574 CM20575 CM20576 CM23555 CM27011 CM29564 CM20666 CM20667 CM20668 CM20669 CM20670 CM20571 PART NAME QTY. REMARKS CIRCLIP 17 1 ACCELERATION SWITCH 230V ....................... 1 .........
CX300 HAND MIXER — MIXER ASSEMBLY MIXER ASSY. 70 8 37 68 73 64 73 76 23 24 1 6 76 32 73 4 73 59 85 13 61 41 57 15 62 12 16 60 80 18 17 13 70 10 82 38 14 19 35 21 20 39 72 26 27 78 3 74 5 55 58 29 79 25 50 71 71 42 2 36 7 46 70 70 70 70 70 30 11 70 71 22 31 43 116 9 117 100 116 118 119 120 PAGE 22 — CX-HF SERIES HAND MIXERS — OPERATION AND PARTS MANUAL — REV.
CX300 HAND MIXER — MIXER ASSEMBLY MIXER ASSY.
CX300 HAND MIXER — MIXER ASSEMBLY MIXER ASSY. 70 8 37 68 73 64 73 76 23 24 1 6 76 32 73 4 73 59 85 13 61 41 57 15 62 12 16 60 80 18 17 13 70 10 82 38 14 19 35 21 20 39 72 26 27 78 3 74 5 55 58 29 79 25 50 71 71 42 2 36 7 46 70 70 70 70 70 30 11 70 71 22 31 43 116 9 117 100 116 118 119 120 PAGE 24 — CX-HF SERIES HAND MIXERS — OPERATION AND PARTS MANUAL — REV.
CX300 HAND MIXER — MIXER ASSEMBLY (CONTINUED) MIXER ASSY. NO 41 42 43 46 50 55 57 57 58 59 60 61 62 64 68 70 71 72 73 74 76 78 79 80 82 85 100 116# 117# 118# 119# 120# PART NO CM24060 CM20571 CM20572 CM28548 CM20593 CM29534 CM27035 CM27054 CM20588 CM23556 CM20584 CM20583 CM20584 CM20579 CM20567 CM25062 CM29563 CM20574 CM20575 CM20577 CM20576 CM20578 CM20507 CM23555 CM27011 CM29564 CM20666 CM20667 CM20668 CM20669 CM20670 CM20571 PART NAME QTY. REMARKS CIRCLIP A15 X1.
CX400 HAND MIXER — MIXER ASSEMBLY MIXER ASSY. 70 8 55 91 37 68 73 64 6 73 76 32 76 23 4 1 76 24 73 76 85 12 13 73 15 14 13 41 38 13 62 63 61 57 59 19 39 21 17 80 60 16 18 20 35 26 70 10 82 78 3 72 27 74 29 79 25 58 71 5 71 56 71 42 36 46 50 11 22 43 2 116 100 70 70 70 70 70 9 31 116 118 119 120 70 30 117 7 71 71 PAGE 26 — CX-HF SERIES HAND MIXERS — OPERATION AND PARTS MANUAL — REV.
CX400 HAND MIXER — MIXER ASSEMBLY MIXER ASSY.
CX400 HAND MIXER — MIXER ASSEMBLY MIXER ASSY. 70 8 55 91 37 68 73 64 6 73 76 32 76 23 4 1 76 24 73 76 85 12 13 73 15 13 14 38 41 13 62 63 61 57 59 19 39 21 17 80 60 16 18 20 35 26 70 10 82 78 3 72 27 74 29 79 25 58 71 5 71 56 71 42 36 46 50 11 22 43 2 116 100 70 70 70 70 70 9 31 116 118 119 120 70 30 117 7 71 71 PAGE 28 — CX-HF SERIES HAND MIXERS — OPERATION AND PARTS MANUAL — REV.
CX400 HAND MIXER — MIXER ASSEMBLY (CONTINUED) MIXER ASSY. NO 41 42 43 46 50 55 56 57 58 59 60 61 62 63 64 68 70 71 72 73 74 76 78 79 80 82 85 100 116# 117# 118# 119# 120# PART NO 24060 20571 20572 28548 20703 20712 20689 23557 20692 23556 20585 20583 20585 20682 20579 20567 25062 29563 20574 20575 20577 20576 20578 20507 23555 27011 29564 20666 20667 20668 20669 20670 20571 PART NAME QTY. REMARKS CIRCLIP A15 X1.
CX600 HAND MIXER — MIXER ASSEMBLY MIXER ASSY. 82 83 93 10 80 81 85 90 20 90 87 87 94 86 86 15 5 5 51 50 19 1 16 52 96 4 96 107 30 22 41 26 28 27 22 42 111 71 96 30 38 96 55 35 36 37 72 73 5 34 31 39 174 175 60 29 30 70 45 3 5 91 79 91 103 46 93 101 105 61 76 48 91 66 77 44 56 25 40 62 2 116 100 117 91 91 118 120 116 119 14 93 PAGE 30 — CX-HF SERIES HAND MIXERS — OPERATION AND PARTS MANUAL — REV.
CX600 HAND MIXER — MIXER ASSEMBLY MIXER ASSY. NO 1 2 3 4 5 10 14 15 16 19 19 20 20 22 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 44 45 46 48 50 60 51 52 55 56 PART NO CM20532 CM20533 CM20705 CM20554 CM20646 CM20602 CM20536 CM20535 CM20529 CM20589 CM20599 CM20590 CM20600 CM20516 CM20711 CM20710 CM20504 CM20704 CM20501 CM20518 CM20506 CM28543 CM20511 CM20660 CM20508 CM20608 CM20609 CM20513 CM20687 CM20686 CM20528 CM20562 CM20581 CM25022 CM25053 CM25053 CM29544 CM23519 CM23507 CM26016 PART NAME QTY.
CX600 HAND MIXER — MIXER ASSEMBLY MIXER ASSY. 82 83 93 10 80 81 85 90 20 90 87 87 94 86 86 15 5 5 51 50 19 1 16 52 96 4 96 107 30 22 41 26 28 27 22 42 30 111 71 96 38 55 35 36 37 72 73 5 34 31 39 174 175 60 29 30 70 96 45 3 5 91 79 91 103 46 93 101 105 61 76 48 91 66 77 44 56 25 40 62 2 116 100 117 91 91 118 120 116 119 14 93 PAGE 32 — CX-HF SERIES HAND MIXERS — OPERATION AND PARTS MANUAL — REV.
CX600 HAND MIXER — MIXER ASSEMBLY (CONTINUED) MIXER ASSY.
TERMS AND CONDITIONS OF SALE — PARTS Terms and Conditions of Sale STOW Construction Equipment PAYMENT TERMS Terms of payment for unit sales are 2% 15 days net 30 days from date of invoice unless otherwise specifically stated on our invoice. Parts invoices have terms of net 10 days. Minimum parts billing is $15.00 net. Applicable discounts will be computed on merchandise value only. Late charges will be assessed at prevailing rates.
NOTE PAGE CX-HF SERIES MIXERS — OPERATION AND PARTS MANUAL — REV.
OPERATION AND PARTS MANUAL HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 FAX: 800-672-7877 310-537-3700 FAX: 310-637-3284 SERVICE DEPARTMENT 800-478-1244 FAX: 310-537-4259 310-537-3700 TECHNICAL ASSISTANCE 800-478-1244 FAX: 310-631-5032 WARRANTY DEPARTMENT 800-421-1244, EXT. 279 FAX: 310-537-1173 310-537-3700, EXT. 279 SALES DEPARTMENT 310-661-4242 FAX: 310-604-9237 877-289-7869 (877-BUY-STOW) © COPYRIGHT 2008, MULTIQUIP INC.