CC9648 Chassis User Guide
CC9648 Chassis User Guide P/N 82074201, Revision B Copyright © 1999 by Multi-Tech Systems, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. Multi-Tech Systems, Inc. makes no representation or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Furthermore, Multi-Tech Systems, Inc.
Federal Communications Commission Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
FCC Fax Warning The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom of each page or the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such business, other entity
Important Safety Requirements • No manual adjustments to the equipment are necessary for connection to mains power within rated voltage and frequency. • To reduce the risk of shock, all openings should be covered during normal operation of the equipment. • Both supplies must be removed to remove all power from the chassis. The supplies are connected in parallel, so that both power supplies supply power to all power busses in the chassis.
Vigtige Sikkerhedskrav • Det er ikke nødvendigt at foretage manuelle justeringer af udstyret, for at tilslutte udstyret til elektrisitetsuettet indenfor de navute spændingsfrekvensgreuser. • Strømforsyningsledningen er beregnet til at fungere som afbryder. Stikkontakten skal installeres nær ved udstyret og skal være let tilgængelig. • Nedsæt risikoen for stød, ved at tildække alle udstyrets åbninger under normal drift.
Table of Contents FCC Regulations for Telephone Line Interconnection.................................................................................... iii FCC Fax Warning.............................................................................................................................................. iv Canadian Limitations Notice ........................................................................................................................... iv 1 Introduction Introduction ..........
viii CommPlete Communications Server
1 CommPlete Communications Server Introduction 1
CC9648 Chassis User Guide Introduction The CC9648 chassis is the housing for the CommPlete Communications Server. It can contain one chassis controller module, two power supply modules (one is required, and two are recommended), four independent RASCard servers, and 96 modems (12 modem cards, with eight modems per card) or four PRI cards.
1 Introduction Technical Specifications Model Number CC9648 Number of Slots 16 Number of Fans 6 External Connectors Two DC power terminal strips Environmental Temperature range: 0°–40° C (32°–104° F) Humidity range: 0–95% (noncondensing) Dimensions 31.1 × 48.3 × 36.8 cm (12.25 × 19 × 14.5 in.) H × W × D Weight 11 kg (25 lb.
CC9648 Chassis User Guide 4 CommPlete Communications Server
2 CommPlete Communications Server Installation 5
CC9648 Chassis User Guide Introduction This chapter contains only general information about installing the CC9648 chassis. The equipment should be installed only by a qualified service person. The CC9648 is designed to be installed in a standard 19-inch-wide rack cabinet. Figure 1 shows a fully loaded chassis with one controller card, two power supplies, and a full complement of RASCards and modem cards.
2 Installation Installation • If the chassis is installed in a closed or multi-rack assembly, the operating temperature of the rack environment may be greater than the ambient temperature. Be sure to install the chassis in an environment that is compatible with the maximum rated ambient temperature. See technical specifications. • Install equipment in the rack so that forced air cooled in the equipment does not compromise safe operation.
CC9648 Chassis User Guide Important Safety Considerations Fuse Replacement There is one replaceable fuse in the PS9648 power supply. Only qualified service personnel may replace the fuse, with one of the same type and rating as indicated. Caution: For continued protection against risk of fire, replace only with same type and rating of fuse (250 V, 12 A, Type F). Insertion and Removal of a Power Supply Qualified service personnel may insert or remove a power supply without turning off the system.
2 Installation Connections The rear of the CommPlete Communications Server provides connections to power, communications lines, and configuration hardware, as shown in Figure 2. Only the power connectors are part of the CC9648 chassis. The other connectors are mounted on removable cards or modules, and are documented in their respective user guides.
CC9648 Chassis User Guide 10 CommPlete Communications Server
3 CommPlete Communications Server Warranty, Service, and Technical Support 11
CC9648 Chassis User Guide Limited Warranty Multi-Tech Systems, Inc. (“MTS”) warrants that this product will be free from defects in material or workmanship for a period of two years from the date of purchase, or, if proof of purchase is not provided, two years from date of shipment. MTS MAKES NO OTHER WARRANTY, EXPRESSED OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED.
3 Warranty, Service, and Technical Support Technical Support Multi-Tech has an excellent staff of technical support personnel available to help you get the most out of your Multi-Tech product. If you have any questions about the operation of this unit, please call (800) 9722439 (USA and Canada) or (612) 785-3500 (local and international). Please record CC9648 information in the spaces provided below, and have it available when you call.
CC9648 Chassis User Guide The Multi-Tech BBS Multi-Tech maintains a bulletin board system (BBS) for its customers. Information available from the BBS includes new product information, product upgrade data, and problem-solving tips. There is also a message service that lets you request additional information. The phone number for the Multi-Tech BBS is (800) 392-2432 (USA and Canada) or (612) 785-3702 (local and international).
3 Warranty, Service, and Technical Support 6. Select a file transfer protocol by typing the indicated letter, such as Z for Zmodem (the recommended protocol). 7. If you select Zmodem, the file will transfer automatically. If you select another protocol, you may have to initiate the transfer yourself. (In most communications programs, the PAGE DOWN key initiates the download.) 8. When the download is complete, enter S to return to the File Menu.
CC9648 Chassis User Guide About the Internet Multi-Tech is a commercial provider on the Internet, and we retrieve e-mail messages from the following mailboxes on a periodic basis: tsupport@multitech.com Technical Support mtsmktg@multitech.com Marketing Dept. mtssales@multitech.com Sales Dept. international@multitech.com International Marketing & Sales writers@multitech.com Publications Dept. Multi-Tech’s presence includes a Web site at: http://www.multitech.com and an ftp site at: ftp://ftp.multitech.
P/N 82074201
