User guide

CC9648 Chassis User Guide
2 CommPlete Communications Server
Introduction
The CC9648 chassis is the housing for the CommPlete Communications Server. It can contain one chassis
controller module, two power supply modules (one is required, and two are recommended), four
independent RASCard servers, and 96 modems (12 modem cards, with eight modems per card) or four
PRI cards. The standard CC9648 chassis comes with two PS9648 350-watt, hot-swappable, redundant
power supplies and an MR9600 system controller with an integrated Ethernet concentrator.
Key Features
• Four independent segments for any combination of T1-Starter or PRI-Starter segment kits.
• Data bus eliminates serial cables.
• Ethernet bus reduces network cables to one.
• T1 bus works with T1 card to eliminate the need for a channel bank.
• Control bus delivers management, reporting, and control information to the controller.
• Side-venting cooling fans and a heat sensor with built-in reporting guard against overheating.
Manual Organization
Chapter 1 Introduction
This chapter describes the CC9648, gives its technical specifications, and provides a guide to the
organization of the manual.
Chapter 2 Installation
This chapter contains installation precautions and shows the location of all connectors on the rear of the
CC9648.
Chapter 3 Warranty, Service, and Technical Support
This chapter describes the warranty and how to obtain service and technical support.