Installation guide

Enabling SIP Proxy Ports on ShoreGear Switch

To allocate proxy ports for SIP extensions:

1. Go to Administration > Platform Hardware > Voice Switches / Service Appliances > Primary.

2. Click a switch name to configure that switch. Edit Switch displays. In the image, the ShoreGear 30 switch

was selected.

3. Change one Available Port Types to 100 SIP Proxy.

4. Click Save.

Note: If the ShoreGear switch you select has built-in capacity for IP phones and SIP trunks (for example,

ShoreGear 50/90/220T1/E1), you can also remove 5 ports from the total number available to provide the

100 SIP Proxy configuration necessary.

For every 5 ports that you remove from the total available, the system will make 100 SIP Proxy ports

available.

One dedicated ShoreGear 120 switch can act as a proxy for the entire site and support up to 2400 SIP

phones.