Installation guide

3. Select the number of SIP trunks from the ports available. Each port designated as a SIP trunk port type

enables the support for five individual SIP trunks.

Note: ShoreTel trunk groups only support Static IP Address SIP endpoint Individual Trunks.

Changing Trunk Group Settings

1. Go to Administration > Trunks > Trunk Groups. Trunk Groups displays.

2. Select a site to configure from the Add new trunk group at site drop down list.

3. Select SIP from the of type drop down list.

4. Click Go. Edit SIP Trunk Group displays.

5. Enter a trunk group name in the Name field.

6. Verify that Enable SIP Info for G.711 DTMF Signaling is not checked. This is only used with SIP tie trunks

between ShoreTel systems.

7. Leave the Profile field at Default Tie Trunk and the Digest Authentication at <None>.