Installation guide

27
You can only increase the disk size before you power on the virtual machine. If you need to have
more disk space for conference recording, you must change it before you power on the virtual
machine.
10. Power on the virtual machine.
11. Open the console on the virtual switch you want to configure and log in with the following credentials:
 User ID: root
 Password: ShoreTel
12. Enter DHCP and server IP information that the server uses to download firmware updates.
13. Restart the virtual switch.
The updated firmware begins downloading and installing automatically. After the firmware upgrade
completes, the virtual machine reboots automatically.
14. When the virtual switch comes back online, open its console and log in using the previous credentials.
15. To open ShoreTel parameters, enter stcli.
16. Record the IP address and MAC address, which you’ll need to configure the virtual switches.
17. Configure the virtual device.
 To configure virtual switches, refer to Configuring Voice Switches in the ShoreTel System Administration
Guide.
 To configure virtual Service Appliances, refer to Configuring the Service Appliance in the ShoreTel
Conferencing and Instant Messaging Planning and Installation Guide.
Configure ShoreGear vTrunk Switch
To configure the Virtual Trunk Switch, first add a new ShoreGear vTrunk Switch to the site and then create a trunk
group with individual trunks.
To Create ShoreGear vTrunk Switch:
1. Go to Administration > Platform Hardware > Voice Switches/Services Appliances > Primary.
2. Select where you want to create a vTrunk from the Add new switch/appliance at site drop down list.
3. Select ShoreGear vTrunk Switch from the of type drop down list.
4. Click Go. The Edit ShoreGear vTrunk Switch window displays.