Installation guide

29
4. Click Go.
5. Enter a trunk group Name.
6. Verify that Enable SIP Info for G.711 DTMF Signaling is not checked. This is only used with SIP tie trunks
between ShoreTel systems.
7. Leave the Profile field at Default Tie Trunk and the Digest Authentication at <None>.
8. Set the Number of Digits from CO to match what the ShoreGear SIP trunk switch receives from this public
network. This is usually configured to match the systems extension length.
9. Verify that Extension and Tandem Trunking are checked. For additional information on these parameters
refer to ShoreTel´s Planning and Installation Guide.
10. Check Outbound.