Installation guide

33
7. Enter the FaxFinder’s IP Address.
8. Click Save to commit the changes.
After setting up the trunk groups and individual trunks, refer to the ShoreTel Planning and Installation Guide to
make the appropriate changes for the User Group settings.
Configure Codecs for T.38 or G.711 Pass Through
Configure the ShoreTel system for either T.38 or G.711 Pass Through. T.38 is recommended, but in cases using
full-width switches, please consider using G.711 Pass Through Configuration, as T.38 is not supported on legacy full-
width switches. For more information, please refer to ShoreTel T.38 Configuration or G.711 Pass Through
Configuration.