Installation guide

34
ShoreTel T.38 Configuration
This section describes how to setup ShoreTel for T.38 faxing. T.38 is the recommended codec for faxing; use it if the
ShoreTel Switch supports it. When configuring for T.38 faxing, the Codec Lists should include T.38.
Create Custom Codec List
1. Login to ShoreWare Director and go to Administration > Call Control > Codec Lists.
2. Click New to create a new codec list.
3. Enter a custom Codec List Name.
4. Select T.38 in the Choose Codecs list and click Add to move it to the Codec List Members.
5. Add any other needed codecs to the Codec List Members.
Note: We recommend limiting the codecs to only what is needed. We also recommend including either
PCMU/8000 (G.711 Mu-Law) or PCMA/8000 (G.711 A-Law), but not both.
6. Click Save changes.