Installation guide

38
FaxFinder IP (FF240-IP) Configuration
This section provides a brief overview of FF240-IP needed to work with ShoreTel. For configuration details and help with
other options, details, refer to the FaxFinder Fax Server FF240-IP Administrator Guide. To download this, go to
www.multitech.com/support and select FaxFinder IP from the drop down list.
Install the FF240-IP on an IP network with the ShoreTel Switch. Basic configuration is detailed in the Administrator
Guide. To verify configuration, configure inbound fax routing and test fax delivery by sending a fax from the FF240-IP
1. Install the FF240-IP using the basic configuration describe in the FF240-IP Administrator Guide. Verify the
fax routing by Sending a Loop Back Test Fax as described in the Administrator Guide.
2. In FF240-IP, go to Fax Configuration > SIP/T.38 and change the SIP Proxy/Gateway to point to the
ShoreTel Switch. If using a Virtual Trunk Switch, set this to the IP address of the Virtual Trunk Switch, this
appears in the ShoreTel Individual Trunk menu.
3. If you configured ShoreTel to use each extension for both voice and fax, set the T.38 Extension Source to
SIP Diversion Header. If using an extension for fax only, set this to SIP To Header.