Installation guide

39
4. If the FF240-IP will not use all the digits ShoreTel sends to it for fax routing, adjust the Extension Digits
and Extension Length. Otherwise, leave these fields at the default settings.
5. If using T.38 to fax, set the Fax Method to T.38 Re-Invite. If using G.711 Pass Through, set the Fax Method
to T.30 Pass Through.
6. Configure Inbound Routing to match the extension numbers that the ShoreTel Switch is faxing to.
View Fax Progress
To view inbound or outbound fax progress go to Status & Logs > Fax Status.