Installation manual

ISI3334/4 Hardware/Driver Installation Manual
40
In other words, these entries tell Multi_View that the terminal sends
the escape sequence specified in column three to Multi_View when
the keystrokes specified in column two are pressed and that
Multi_View should take the action specified in column one whenever
it receives the characters specified in column three.
3.8.3 Terminal Escape Sequences
The terminal escape sequence entries describe the escape
sequence that needs to be sent to the terminal. The first column
contains a mnemonic. The mnemonics are described below:
Mnemonic Description
ps Describes the escape sequence that needs
to be sent to the terminal to switch to the
appropriate physical page. The physical
pages are numbered in the order they are
specified in the description file.
clear Specifies the escape sequence to clear the
screen.
The second column has the character sequence that needs to be
sent to the terminal by Multi_View.
3.8.4 Timing Specification
The timing specification is the interval in tenths of a second that the
utility waits before checking for an escape sequence. The timing
specification is defined below:
Mnemonic Description
time Specifies the interval, in units of 0.1
seconds, Multi_View will wait while reading
characters before checking for escape
sequences.