Network Card User Manual

43-IWay Hopper
Installation
11. If you have installed the RAS, please refer next step to install ISDN ports for
RAS. If not, please install the RAS now. Please refer Figure 2-28 , click the
services tab to add RAS. The RAS is provided by Microsoft, you need to
prepare the Installation disks or CD of Windows NT to continually install it.
You should jump to next step when RAS installer asks to add port device.
12. You will get a window like below. If you do not see the ISDN ports with the
device name of IINWANNT, then click the Add tab to add both IINWANNT
devices.
Figure 2-28. Remote Access Services (RAS) Setup
Windows NT Installation
13. Select the ISDN1 and click Configure tab to set the parameter (Port Usage) to
this ISDN1port for Dial out only, Receive calls only, or Dial out and
Receive calls then click OK.