Network Card User Manual

47-IWay Hopper
Installation
c. Click Configure and check the check boxes for IINWANNT(ISDN1) and
IINWANNT(ISDN2).
d. Select IINWANNT(ISDN1), click Phone numbers, enter the first phone num-
ber, click Add, and click OK.
e. Select IINWANNT(ISDN2), click Phone numbers, enter the first phone num-
ber, click Add, and click OK.
f. You are now ready to make 2B connection with server. Make sure that your ISP
or remote server does in fact support 128K MLP and also that it has been
enabled for you by the remote server.
Figure 2-33. Multiple Line Configuration