User guide

Chapter 2 - Installation Quick Start

SBC Connections

Figure 2-6 shows the two connections between the mux card and the SBC.

BANK 1

BANK 2

OPEN

12345678

SOCKET 7

LOCK

SBC

Mux Card

Hard Drive

Connector

Floppy Drive

Connector

Floppy Drive

Connector

Hard Drive

Connector

Pin 1

40-pin Ribbon

Cable (13)

34-pin Ribbon

Cable (15)

Figure 2-6. Ribbon Cable Connections

In this example, connector SHDD6 (40-pin) connects to the 40-pin hard drive connector on the

SBC board installed in segment 6. Connector SFDD6 (34-pin) connects to the 34-pin floppy drive

connector on the SBC board (Figure 2-10 shows the connection between the mux card and a

hard drive on the same segment).

Make all necessary SBC connections, and then proceed with the Disk Drive Installation section

that follows.