User guide

19
Chapter 2 - Installation Quick Start
7 Select the slot to install the disk drive and slide it into the slot. See Figure 2-8.
Disk Drives
(Hard or Floppy Drives)
Drive Mounting
Screws (4 per device)
8-Bay Vertical
Drive Chassis
Chassis Mounting
Screws (4)
Figure 2-8. Disk Drive Installation
8 Align the disk drive with the mounting holes in the top of the chassis and secure the drive
to the chassis with the four mounting screws provided with the drive. Two mounting
screws in the top of the disk drive and two in the bottom.
9 Continue installing disk drives until complete.
10 Slide the 8-bay disk drive chassis partially into the MultiArray while guiding the bottom of
the chassis frame into the two plastic guides on the floor of the chassis area. Secure the
chassis slides with the two rear chassis mounting screws. Keep the chassis extended as
far out as possible for ease of connecting cables to the drives. When secured, proceed
with the 8-Bay Disk Drive Cabling section that follows.