User guide

30
MultiArray User Guide
Introduction
This chapter discusses software options available on the MultiArray. The hardware installation
procedures in Chapter 2 of this manual must be performed before starting any software loading
or operating procedures.
Configuring Multiple SBCs
When configuring multiple SBCs from a single floppy disk drive, ensure that the diskette is write-
protected or remove the diskette from the disk drive before toggling the BCD display to another
segment. If the diskette is not write-protected or removed from the disk drive, the diskette may
get corrupted when the BCD display is toggled from one segment to the other.
Software Documentation
Operating procedures consist of loading the optional software. Refer to the applicable software
manual for software loading and operation.