User guide

7
Chapter 1 - Introduction and Description
Manual Organization
This manual tells you how to install your MultiArray hardware. For information on the Multi-Tech
or third party Pentium
TM
Based Single Board Computer (SBC), Network Interface Card (NIC),
Intelligent Serial Interface (ISI) Boards, etc., refer to the user documentation shipped with the
board. For information on running software on the MultiArray, refer to the applicable software
user documentation, shipped with your software package. The information contained in each
chapter is as follows:
Chapter 1 - Introduction and Description
Chapter 1 begins with an introduction to the MultiArray and continues with a description of its
hardware features. The chapter ends with a list of technical specifications.
Chapter 2 - Installation Quick Start
Chapter 2 provides the PC board and/or disk drive installation procedure, rack mounting
procedure, and cable connections for your MultiArray.
Chapter 3 - Software Loading
Chapter 3 discusses some software options available for the MultiArrayIII.
Chapter 4 - Troubleshooting
Chapter 4 covers possible steps to take in the event of a MultiArrayIII failure.
Chapter 5 - Warranty Service and Tech Support
Chapter 5 provides a description of the MultiArray’s two-year warranty, and offers instructions on
how to receive service for your MultiArray at the factory. In addition, this chapter provides
information about accessing our user bulletin board service (BBS) as well as receiving support
via our various Internet resources.