Specifications

MultiConnect AW Analog-to-Wireless Converter
Multi-Tech Systems, Inc. Quick Start Guide 3
Introduction
This guide shows you how to set up your MultiConnect AW Analog-to-
Wireless Converter. For detailed information, product description and
specifications, refer to the User Guide, available on the MultiConnect
AW CD accompanying your wireless converter.
Dial Port Caution
The dial port is not designed to be connected to a Public
Telecommunications Network (PSTN/phone line) or used outside the
building.
General Safety
The converter is designed for and intended to be used in fixed and
mobile applications. “Fixed” means that the device is physically secured
at one location and is not able to be easily moved to another location. In
a “Mobile” application, the device may be moved regularly from one
location to another.
Caution: Maintain a separation distance of at least 20 cm (8 inches)
between the transmitter’s antenna and the body of the user or nearby
persons. The modem is not designed for, nor intended to be, used in
applications within 20 cm (8 inches) of the body of the user.
RF Interference Issues
Avoid possible radio frequency (RF) interference by carefully following
the safety guidelines below.
● Switch OFF the MultiConnect when in an aircraft. The use of
cellular telephones in aircraft is illegal. It may endanger the
operation of the aircraft and/or disrupt the cellular network. Failure
to observe this instruction may lead to suspension or denial of
cellular services to the offender, legal action, or both.
● Switch OFF the MultiConnect in the vicinity of gasoline or diesel-
fuel pumps or before filling a vehicle with fuel.
● Switch OFF the MultiConnect in hospitals and any other place
where medical equipment may be in use.
● Respect restrictions on the use of radio equipment in fuel depots,
chemical plants, or in areas of blasting operations.