Specifications

MultiConnect AW Analog-to-Wireless Converter
Multi-Tech Systems, Inc. Quick Start Guide 5
Activate Your Wireless Account
Please refer to the wireless account Activation Notices included with
your MT100A2W-G unit and located on the MultiConnect CD. Choose
the one for your wireless network provider and follow the directions to
activate your account.
Insert SIM Card into Holder
The MultiConnect requires the power supply connection to begin
operation. It also requires a SIM card (Subscriber Identity Module) in the
MT100A2W-G unit to operate on a GPRS/GSM network. To install the
SIM, do the following:
1. Using a small Phillips screwdriver, remove the two SIM door screws
and remove the SIM door.
Note: When changing a SIM, ensure that power is removed from
the unit.
2. Insert the SIM card into the card holder. The above figure illustrates
the correct SIM card orientation.
3. Verify that the SIM card fits properly; then replace the door.