Specifications

MultiConnect AW Analog-to-Wireless Converter
6 Multi-Tech Systems, Inc. Quick Start Guide
Connect the Antenna, Serial Cable,
Modem Cable, and Power
MT100A2W-G
MT100A2W
1. Connect a suitable antenna to the ANT connector on the
MT100A2W-G model.
2. Connect the DE9 connector (9-pin) of the RS232 cable to the
COMMAND connector on the unit and connect the other end to
serial port on your PC.
3. For the MT100A2W model, connect an RS232 cable, male
connector to the MODEM connector on the back of the unit. Connect
the other end of the cable to your external wireless modem.
4. Connect the RJ11 phone cable to the DIAL connector on the unit
and connect the other end of the phone cable to the customer’ s
analog modem.
5. Remove the protective shipping cover. Attach the appropriate input
connector to the power supply module by holding down on the slide
lock and tipping the input connector to fit into the notch on top of the
module and then lowering it into the slide lock. Then release the
slide lock.
6. Screw-on the power lead from the power supply module to the power
connection on the unit. Now, plug the power supply into your power
source.