Specifications

MultiConnect AW Analog-to-Wireless Converter
Multi-Tech Systems, Inc. Quick Start Guide 7
Configure your MultiConnect
Configuration of the MultiConnect varies slightly depending on which unit
you are configuring. The MT100A2W-G has an internal GSM/GPRS
wireless modem. The MT100A2W requires a Multi-Tech CDMA, RS232
based external modem for its cellular connection. Cellular Port
configuration for the MT100A2W-G has more configuration options than
the MT100A2W unit. The differences are detailed in Device
Configuration section.
The following configuration procedures are based on the Windows XP
Operating System. Other Windows operating systems have similar paths
to HyperTerminal. See your system’s online Help if you cannot find it.
HyperTerminal
1. Go to Start I All Programs I Accessories I Communications and
then click on HyperTerminal.
2. In the Name: window, enter an applicable name for your
MultiConnect connection. Click OK.
3. Change the Connect using: window to the COM port for the
MultiConnect. Click on the down arrow and select your COM port.
4. Change the default Bits per second: window from 2400 to 115200.
Click the Apply button and then OK.
Login
A blank HyperTerminal screen is displayed. Enter the default
password of admin
What would you like this port to do? Screen is displayed.
Enter Selection => _ Enter A and press OK